Worksman Custom Heavy Duty Cruiser

Ladies, Model SCL

You can design this heavy duty cruiser from the ground up. This is the ultimate customized bike. First, when you click on the link for the drive train, you are given the drive train options below. Select a drive train option, then come back to this page and select the seat, handlebars, wheels, tires, and any other options you desire. You can keep track of the running total on the shopping cart.

Step 1.

Select Your Drive Train:

Ladies model SCL cruiser with single speed coaster brake,


Ladies Model SCL cruiser with 3 speed coaster brake,


Ladies Model SCL cruiser with 7 speed coaster brake,

Ladies Model SCL cruiser with 1 speed freewheel drive, and front and rear drum brakes

Click the link at step 1., above, to make your choice.

Price includes shipping in the lower 48 U.S. states.

Delivery is within 5 to 6 weeks. These bikes are made to order. It takes about 4 weeks to build the bike and another week or so for shipment.

Selecting The Drive Train For Your Bike

The drive train determines how many speeds your bike has, and the type of brakes. The single speed coaster brake is the standard option, and is furnished at no extra charge. If you ride in an area that is pretty flat 1 speed will work fine. If it is a little hilly 3 speeds may be required. If there are a lot of hills you might want to think about 7 speeds. The one speed free wheel drive comes with front and rear drum brakes for extra heavy braking requirements. This type of drive is used on a 26 mile down hill run in Hawaii.

Just click "Step 1." and you will see the shopping cart appear. You can select the drive train you want in the shopping cart. Just click the continue shopping button when you are through. You will return to this page, and you can click the "Step 2." link.

As you select each system, the shopping cart will present the available options, along with the price for each option. That option price will be added to the base price of your bike.

If you select a 3 speed or seven speed model ask for a 36 tooth front sprocket for easier pedaling. (No Extra Cost) Click here to select sprocket size

When Finished Proceed To Step 2.

These are the most popular option upgrades for the heavy duty cruiser.

Price includes shipping in the lower 48 U.S. states

Click here for ordering information

Steps 2. through 8. (Required)

Click on each step. Even if you just want the standard, no additional cost option, you must make a choice.

Step 2. Select Saddle.

Step 3. Select Tires.

Step 4. Select Tubes.

Step 5. Select Handle Bars.

Step 6. Click to Select Wheels:

Step 7. Select Front Fork.

Step 8. Select Paint Color.

Step 9.0 Select Fenders

Custom Bike Assembly Is Complete.

Selecting Cuctom Bike Options, Steps 2 Through 8

The bike in the photo is shown with the 28" cruiser handlebars. The other choices are 24" cruiser handlebars, jr. high rise handle bars with a 9" rise, and a straight handle bar. The bike in the photo has the standard cruiser saddle (10" Wide), and a front basket.

At each step you may select the standard option, which is at no extra cost. The price of each custom option will be given, and that price will be added to the total price of the bike. If you change your mind just click the "X" in the shopping cart and repeat that step.

After you make your selection click the "Continue Shopping" button, and you will be returned to this page. Continue on from steps 1. through 8.

At Step 8. the assembly of your custom bike is complete. There are some other additional upgrade options in the list at lower left titled "Popular Upgrade Options"you may want to consider.

The table titled "Popular Upgrade Options" has some customizing options like puncture proof tubes, sealed crank bearingts, and a front drum brake to improve the safety and efficiency of your bike.

You should also check out the "Optional Accessories", below as these can only be purchased at the time you buy a new bike.

These accessories are only available when you order a Worksman Bike.

Congratulations on the construction of your custom beach cruiser. Allow 6 to 8 weeks for delivery.

This is a partial page. If you entered our site from this page, click here to see the complete page.

Other Optional Accessories

Cycle Accessories
Any of the accessories listed below may be added to your new Worksman bike at the price indicated.  These accessories are shipped in a separate package, with no shipping charge to you   These accessories are only available to purchasers of new Worksman Bicycles.

Part No.        Description                                             

P2........Ding Dong Warning Bell.......................................


P3.......Squeeze Bulb Horn................................................


P4.......Vinyl Covered Cable W/Padlock.............................


P5.......Rear View Mirrow..................................................


P7.......Headlight (Battery Operated)................................


P8.......Safety Flag on Pole (Brite Orange).........................


P19......Bike Helmet (Adult)...............................................


P101710..Flashing Strobe Light (Clear).............................


P101714..Flashing Strobe Light (Red)...............................


P3973.....Mega Horn (Battery Operated)...........................


P3971....2 Wheel Bike Storage Cover...............................


P3975...Generator Light Set..............................................


G4..... Dual Rear Basket(2 Wheel Bikes)...........................

G2.... Large front Basket (2 Wheel Bikes).......

G1.....Small front Basket (2 Wheel Bikes).......................


Note: Item G2 is a very large front basket and isn't suitable for the Unisex Cruisers, or Folding Tandems.

These accessories are only available when you order a Worksman Bike